Liquid-liquid extraction of protease from cold-adapted yeast Rhodotorula mucilaginosa L7 using biocompatible and biodegradable aqueous two-phase systems

This work aimed to optimize the extraction of an extracellular protease produced by the cold-adapted yeast Rhodotorula mucilaginosa L7 using aqueous two-phase systems (ATPS) comprising polyethylene glycol (PEG) and sodium citrate or sodium tartrate. First, the biocompatibility of the phase forming agents was assessed. The results obtained with PEG-2000, PEG-4000, and PEG-6000 demonstrated that even at large PEG concentrations (32 wt%) the protease maintains its activity after 3 h of reaction, whereas an increase in salt concentration provokes a gradual decrease in protease stability. Subsequently, the partitioning of the protease in both types of ATPS was assessed, evaluating the effect of temperature, molecular weight, and concentration of PEG on protease purification, using two 2³-full factorial designs. The best partitioning conditions were obtained in PEG-6000/sodium tartrate-based ATPS, at 30ºC (with a yield of 81.09 ± 0.66% and a purification factor of 2.51 ± 0.03). Thus, considering the biodegradable characteristics of the system, the PEG/sodium tartrate ATPS is a viable and economic low-resolution step in protease purification, with a strong potential for future industrial application.     

trans Fatty Acids in Colostrum,Mature Milk and Diet of Lactating Adolescents

The purpose of this study was to investigate the trans fatty acids (TFA) content and distribution in colostrum, mature milk, and diet of adolescent mothers, after TFA declaration in food labels became mandatory in Brazil. Participants were healthy adolescents (n 54, 15–19 years, 1–90 days postpartum) practicing exclusive breastfeeding. Milk samples were collected 3 days after delivery (colostrum) and in the third month postpartum (mature milk) by hand expression. The fatty acid composition of the milk samples was determined by gas chromatography. TFA intake corresponded to 1.23 % of total energy value. Total 18:2 TFA accounted for less than 0.5 % of the energy intake. The amount of total 18:1 TFA (mean ± SEM) was 1.9 % ± 0.14 in colostrum and 1.5 % ± 0.2 in mature milk. The total content of n‐3 PUFA was inversely correlated with the total content of 18:1 TFA in colostrum. Both in colostrum and in mature milk, vaccenic acid (11t‐18:1) was found to be the most abundant 18:1 trans isomer, followed by elaidic acid (9t‐18:1), whereas rumenic acid (9c,11t‐18:2 CLA) was the predominant 18:2 trans isomer. In conclusion, the levels of TFA of industrial sources found in the mother's diet and breast milk (colostrum and mature milk) showed a decrease in relation to those observed in studies conducted prior to the TFA labeling resolution in Brazil. However, the current low intake levels of n‐3 LCPUFA and DHA content in the milk of lactating adolescents may be insufficient for supporting adequate neurological development of the infants.     

Structure–property relationship of sodium deoxycholate based poly(ester ether)urethane ionomers for biomedical applications

New sodium deoxycholate based poly(ester ether)urethane ionomers were prepared for the development of biomedical materials. A structure–property relationship in the tested biomaterials was established by cross‐examination of the dynamic mechanical and dielectric properties, attenuated total reflection–Fourier transform infrared investigation, thermogravimetric analysis, and surface morphology characterization. A stronger ionic interaction and solvation capacity of the ions and a higher ionic conductivity were manifested in the case of poly(ethylene oxide)‐rich segments than for poly(propylene oxide)‐rich segments in these polyurethane ionomers. The molecular and ionic interactions of the bile‐salt moiety with different polyether cosoft segments influenced chain packing and conformation, supramolecular organization, and the resulting surface morphological microstructures of the polyurethane biomembranes. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42921.     

Preliminary Studies on Furfural Production from Lignocellulosics

This study focused on the production of furfural from agricultural and industrial biomass residues by a hydrodistillation process. Corncobs, sugarcane bagasse, and eucalypt wood were treated with sulfuric, hydrochloric, and phosphoric acids as catalysts, with different acid concentrations (1.5 to 5.2 mol.L ^?1). In addition, the eucalypt liquor from the auto-hydrolysis, kraft-dissolving pulp production process was also investigated as a source of furfural, using sulfuric and hydrochloric acids as a catalyst (0.9 and 3.9 mol.L ^?1) . Furfural yields of 30.2, 25.8, and 13.9% were achieved for corncob, sugarcane bagasse, and eucalypt wood, respectively, on the basis of biomass dry weight. The efficiency of conversion from pentose to furfural using eucalypt liquor from the auto-hydrolysis kraft process was 71.5% using HCl 3.9 mol.L ^?1 . Due to the presence of a high amount of pentose, corncob produced the highest amount of furfural, followed by sugarcane bagasse and then eucalypt wood.     

Effects of benzoyl peroxide on some properties of composites based on hemp and natural rubber

The obtaining and characterization of polymer composites based on natural rubber and hemp, in which the elastomer crosslinking has been achieved with benzoyl peroxide, are presented. The mechanical characteristics, gel fraction, crosslink density, water uptake swelling parameters and FTIR of the composites based on natural rubber and hemp fiber vulcanized by dibenzoyl peroxide have been investigated as a function of the hemp content. The hardness, modulus at 100 % elongation, tearing strength, tensile strength and elongation at break have been improving with the increasing of fiber content in composites materials due to the better interaction of fiber in natural rubber composites. These results indicate that hemp has a reinforcing effect on natural rubber. Gel fraction value is over 95 % for all blends and varies irregularly depending on the amount of hemp in the composites. The crosslinking density (ν) of samples increases as the amount of hemp in blends increases, because hemp act as a filler in natural rubber blends and leads to reinforcement of the blends. The water uptake and swelling parameters also increases with the increasing of the amount of fiber content, because of the hemp hydrophilic characteristics.     

Synthesis of ternary zinc spinel oxides and their application in the photodegradation of organic pollutant

Ternary zinc spinel oxides such as Zn₂SnO₄, ZnAl₂O₄ and ZnFe₂O₄ were synthesized and characterized, and their activities in the photodegradation of phenol molecules were investigated. Zn₂SnO₄, ZnAl₂O₄ and ZnFe₂O₄ powders were synthesized by hydrothermal, metal–chitosan complexation and solvothermal routes, respectively. The face-centered cubic spinel structure of each material was confirmed by powder X-ray diffractometry (XRD) and its porous structure by N₂ adsorption–desorption isotherms. The characterization of spinels was complemented with Fourier transform infrared spectroscopy (FTIR) and X-rays fluorescence (XRF), revealing the formation of spinel structures with high purity. The photocatalytic activity in the degradation of phenol was observed only with Zn₂SnO₄ oxide. Mineralization degree of phenol molecules by Zn₂SnO₄ photocatalyst determined by total organic carbon analysis (TOC) reached 80% at 360 min under sunlight.     

Physical and Functional Properties of Blackberry Freeze- and Spray-Dried Powders

The aim of the present work was to develop two products from blackberry juice by freeze and spray drying with potential use as food colorants or healthy ingredients. A characterization of the physical and functional properties of the powdered juices was done. Maltodextrin or a mixture of trehalose and maltodextrin were assessed as carrier matrices. Freeze-dried, maltodextrin-containing powders presented the best retention of bioactive compounds and antiradical activity; however, they showed a narrow relative humidity range for storage in the glassy state. Spray-dried powders showed better physical properties, bearing higher glass transition temperature and lower molecular mobility than freeze-dried formulations.